Pleneo Knowledge
Requests
Contact Pleneo Support
Knowledge. Simplified.
Home
Pleneo Rooms
Deploy

Deploying Rooms

Deployment Methods
When to use Local vs. Pleneo Cloud Deployment?
Pleneo offers two simple ways to deploy RoomHub , depending on how much automation or control you need: Zero Touch Cloud Deployment , fully automated...
Local Deployment
Local Deployment
This guide shows how to configure a room directly in the RoomHub WebGUI. You’ll add your devices, validate the system, and run AI AutoDeploy™ to tes...
Cloud Deployment
Deploy a room with Pleneo Cloud
This guide shows how to create and deploy a room using Pleneo Cloud . You define the room once in the cloud. When the hardware is connected on-site, ...
Deployment Tools
How AI AutoDeploy Works
AI AutoDeploy™ is Pleneo’s automatic room setup and tuning process. Consistent quality defined by the system, not the person deploying it It takes a n...
How long does it take to set up a room with AI Autodeploy?
Setting up a room with AI Autodeploy takes just a few minutes. You can choose between two setup methods depending on your workflow and network require...
Device Setup
Network Settings – RoomHub
This guide explains how to change network settings on RoomHub . Open the RoomHub WebGUI Select the menu in the top left corner Go to Settings Select...
How to provide third-party access for Sennheiser TCCM using Control Cockpit?
To use Sennheiser TCCM with a Pleneo Device Hub, you need to enable third-party access in Sennheiser Control Cockpit . This allows the microphone t...
What is an AV network MAC address - or Dante network MAC?
In RoomOS, the AV Network refers to the dedicated network used for audio and video transport, such as Dante audio and video-over-IP. Each Pleneo Dev...
Setting Up Audio-Based Camera Tracking
If your camera doesn’t include built-in tracking, RoomOS can provide automatic audio-based tracking. To begin, select “Set up camera.” Start by savin...