AI AutoDeploy™ is Pleneo’s automatic room setup and tuning process.
Consistent quality defined by the system, not the person deploying it

It takes a newly connected room and turns it into a working system without manual configuration. Devices are discovered, tested, routed, and tuned automatically, so the room is ready to use in minutes.

AI AutoDeploy is designed to deliver consistent results, whether you’re setting up one room or deploying hundreds.

When AI AutoDeploy™ starts, RoomHub automatically finds everything connected to the system.

It:

• Discovers all connected AV devices

• Checks basic connectivity

• Confirms each device is working correctly

Once devices are validated, AI AutoDeploy:

• Sets up the correct internal signal routing

• Automatically creates required Dante subscriptions

• Configures system control logic

This ensures audio flow and system behavior are ready before tuning begins.

Audio tuning is handled by AudioIQ, Pleneo’s AI-driven calibration engine.

RoomHub:

• Plays reference audio through the speakers

• Measures the room using ceiling microphones

• Analyzes reverberation, ambient noise, and reflections

Using reference data from Pleneo-tested microphones and speakers, AudioIQ™ automatically:

• Adjusts gain levels

• Applies equalization

The result is clear, natural, and intelligible speech, tuned specifically for the room.

AudioIQ™ is the complete measurement and tuning process within AI AutoDeploy and is covered in more detail in a separate article.

AI AutoDeploy works with:

• Pleneo speakers

• Pleneo-certified microphones

If you use third-party speakers or custom Dante microphones, AI AutoDeploy is not available. In these cases, the system can still be set up manually using Advanced Mode.

A full compatibility list is available under Works with Pleneo.

AI AutoDeploy is designed to make setup simple and repeatable.

Benefits:

• Fully automatic - detects, tests, configures, and controls devices

• Validated setup - confirms everything works before tuning starts

• Optimized audio - AudioIQ™ tunes the room for clear speech

• Automatic control logic - system behavior is configured for you

• Camera-ready - enables automatic tracking with Pleneo RoomVision cameras

The experience is predictable and consistent, even at scale.